The Climbing Ring Replacement for Maytronics Robots

The No-Hassle Installation Process for Your Dolphin Pool Cleaner

Maintaining your Dolphin pool cleaner can be a straightforward process once you understand the basics. This installation guide will walk you through the steps to replace the combined brushes and climbing rings, based on the replacement instructions for the Dolphin Nautilus model.

First, open the sides of the pool cleaner. You'll need a screwdriver to remove the 4 screws on the side panel. Next, remove the tracks on each side/end of the opened pool cleaner.

Proceed to snap out the ends of the brush roller, one end at a time. Only when both ends are snapped out can you lift the brush roller out of the pool cleaner's frame. Use a flathead screwdriver to pry the small cap off the end of the brush roller's center tube, then remove the roller's center tube and the gear caps.

Caution: Check the climbing rings' pliability. Dried-out foam rollers can be difficult to remove and may damage the brushes. Soak the brush roller in water until they become softer and more pliable.

Slide the climbing rings off the brush rollers. When you receive the new rings, soak them thoroughly in water to prepare the product for optimal usage. Be careful when installing the climbing rings – slide them in slowly and ensure they are seated properly in their designated space.

Reassemble the brush roller assemblies, replace them in their designated slots, return the tracks, and screw back the side panels.

Replacement Parts: 3pk Black Pool Cleaner Tires, 48-232 2pk Gray Pool Cleaner Timing Track, Manufacturer Code 9985006-R2 2pk Replacement Gray Tracks, Part Number 9983152-R2 White Weir Gate Assembly, Replacement 516252, 8 1/2 Inches x 5 3/8 Inches White Weir Gate Replacement, Part Number 08650-0022, 8 1/2 Inches x 5 1/8 Inches 2pk 4-oz All Purpose Epoxy Putty Stick, Pool Bounding Kit

Customer Reviews: 4.7 out of 5 stars (230 reviews) 4.3 out of 5 stars (226 reviews) 4.3 out of 5 stars (473 reviews) 4.3 out of 5 stars (312 reviews) 4.5 out of 5 stars (333 reviews) 4.3 out of 5 stars (247 reviews)

Compatibility: Our climbing ring replacement kit is compatible with Dolphin Robotic Pool Cleaners like M200, M400, M500, Nautilus, Nautilus CC Plus, DX3, DX4, DX6, Aquarius XL, Premier, Oasis Z5i.

The package comes with all four climbing rings 6101611-R4, also fit Sigma, Triton (old), Deluxe 4/5, Apollo Plus, Wave 65, Endeavor, Edge, HD, Saturn (old), Atlantis, Apollo, 3001, 2X2, Wave 2X2, Prowler 820/83.

Our replacements are made from PVA, ensuring they last longer. They are perfect for maintaining your pool safe and functioning properly.

All parts come with a 60-day hassle-free return policy, so if you have any issues, simply reach out to us, and we'll issue a 100% refund.

For a simple installation, soak the climbing rings thoroughly in water until they expand and soften enough to install on the rollers. Slide them in slowly and ensure they are seated in their designated space.

product information: